Model KM-2300 is a new Class “A” Power Quality Analyzer introduced by “KUSAM- MECO”, an ISO 9001-2015 certified company. This Power Quality Analyzer has an Auto Power off & LCD Backlight display function. It has safety features CAT III 1000V / CAT IV 600V & standards IEC610191, IEC61000-4-30 A Class. It can be easily operated to capture the power quality problem. It can be used in Single-phase 2W / Single-phase 3W / 3-phase 3W / 3-phase 4W system. It displays Run Chart, Bar Chart, Vector Graphic, Waveform, Event List, Readings & 32G Memory Card to Make the long-term measuring data storage. It support USB port to connect to PC and analyze the data / screen shots copied by U-disk & also supports LAN port to make the remote control available, transfer
the measuring data. Also Supported WIFI, GPS communication.

It measures Voltage range (0~1000Vrms), Current range (1~3000Arms), Frequency range (42.5~57.5Hz & 51~69Hz), Harmonics range (0~50). It can also measure Active power range (1.0~20M Ohm), Apparent power range (1.0~20M Ohm), Reactive power range (1.0~20M Ohm), Power factor range (0~1), Energy (0kWh~200GWh), DIPS & SWELLS range (0~200% for Vrms/Arms) with Programmable threshold in % of nominal voltage Event detection based upon ½ cycle rms voltages Captures Dips, Swells Interruptions and Rapid Voltage Changes. This model has Data Logger function, System monitor (Record time upto 7 days & Record Event number >10000). It has adapter input AC 220V (1 ± 10%), 50 Hz (1 ± 5%), ≤ 10VA. It is supplied with Voltage Test Lead, Alligator Clips, Power Adaptor, Power Cord, Hang strap, Software CD & User Manual.


G-17, Bharat Industrial Estate, T.J. Road, Sewree (W), Mumbai :- 400015. India.
Sales Direct :- 022-24156638, 27754546 Tel :- 022-24124540, 24181649, 27750662

Email :-
Website :-

Leave a Reply

Your email address will not be published. Required fields are marked *